Evaluation of Retentive Strength of 50 Endodontically-Treated Single-Rooted Mandibular Second Premolars Restored with Cast Post Cores Using 5 Common Luting (Cement) Agents.

BACKGROUND A luting agent is a dental cement used to secure a dental restoration. This study aimed to evaluate retentive strength of 50 endodontically-treated single-rooted mandibular second premolars (extracted) restored using 5 common luting (cement) agents. MATERIAL AND METHODS Fifty single-rooted mandibular second premolars with adequate root length and uniform size/shape were decoronated. After completing endodontic biomechanical preparation and obturation, root canals of all specimens were prepared to receive a cast post core. Depending upon cementation type, CPC specimens were divided in 5 groups (10 each) (Gp): Zinc phosphate (Gp ZP), polycarboxylate (Gp PC), glass ionomer (Gp GI), resin-modified glass ionomer (Gp RGI), and resin cement (Gp RC). Retentive strength was determined using the adhesive failure pull-out test. Mean/standard deviations were calculated for tensile forces (in kilograms) and differences were determined using analysis of variance (ANOVA). Multiple comparison was performed using the t test. A P value of ≤0.05 indicated a statistically significant difference. RESULTS The order of mean tensile strength from higher to lower was Gp RC (21.46) >Gp RGI (18.17) >Gp GI (16.07) >Gp ZP (15.33) >Gp PC (13.63). Differences in retentive strengths between the cements were significant (P≤0.05). Multiple-group comparisons showed that except for Gp ZP and Gp GI, all groups differed significantly from each other. CONCLUSIONS All investigated cements provided optimal retentive strengths, with wide differences between them. Resin cements should be used when CPC removal is not anticipated, while polycarboxylate or zinc phosphate should be used if CPC removal is anticipated.

An up to 43-year longitudinal study of fixed prosthetic restorations retained with 4-META/MMA-TBB resin cement or zinc phosphate cement.

STATEMENT OF PROBLEM: Adhesive resin cement has been the preferred choice for the placement of prosthetic restorations, but evidence-based studies supporting this selection are sparse. PURPOSE: The purpose of this study was to test the hypothesis that restoration placement with the adhesive 4-methacryloxyethyl trimellitate anhydride/methyl methacrylate-tributylborane (4-META/MMA-TBB) resin cement is associated with better longevity of teeth than zinc phosphate cement up to 43 years. MATERIALS AND METHODS: Study participants were individuals who had been visiting the clinic regularly for more than 20 years from their first visit between November 1970 and April 1985. The vital teeth with prosthetic restorations (N=454), including cast inlays, onlays, crowns, and fixed partial dentures, of 53 patients were assessed from dental charts and radiographs. Most of the bonding surfaces were precious metal alloy, excluding 4 restorations cemented with zinc phosphate and 6 ceramic crowns cemented with 4-META/MMA-TBB resin cement. The Kaplan-Meier method and log-rank test (α=.05) were used to compare longevity between the 2 materials. Chi-squared tests (α=.001) were also used to examine the occurrence rates of events such as secondary caries, endodontic treatment, and the dislodgement of restorations affecting the longevity of the 2 cements. RESULTS: Clinical review examination demonstrated that 55.4% of teeth retained with 4-META/MMA-TBB resin cement had been in service for 30 years compared with 43.5% of those retained with zinc phosphate cement, with a significant difference (P=.006). 4-META/MMA-TBB resin cement also demonstrated lower event occurrence rates than zinc phosphate cement for 3 assessed types of events (P<.001). CONCLUSIONS: Within the limitations of this study, 4-META/MMA-TBB resin adhesive cement demonstrated a higher survival rate than conventional zinc phosphate cement in service for 30 years with a lower occurrence of critical events.

Fleck-like lesions in CEP290-associated leber congenital amaurosis: a case series.

PURPOSE: To provide a detailed ophthalmic phenotype of a small cohort of patients with Leber Congenital Amaurosis (LCA) caused by mutations in CEP290 (CEP290-LCA) with a focus on elucidating the origin of yellow-white lesions observed in 30% of patients with this condition. METHODS: This is a retrospective review of records of five patients with CEP290-LCA. Patients had comprehensive ophthalmic evaluations. Visual function was assessed with full-field electroretinograms (ffERGs) and full-field sensitivity testing (FST). Multimodal imaging was performed with spectral domain optical coherence tomography (SD-OCT), fundus autofluorescence (FAF) with short- (SW) and near-infrared (NIR) excitation wavelengths. RESULTS: All patients showed relative structural preservation of the foveal and near midperipheral retina separated by a pericentral area of photoreceptor loss. Yellow-white, fleck-like lesions in an annular distribution around the near midperiphery co-localized with hyperreflective lesions on SD-OCT. The lesions located between the inner segment ellipsoid signal and the apical retinal pigment epithelium (RPE). The inner retina was normal. Longitudinal observations in one of the patients indicates the abnormalities may represent an intermediate stage in the degenerative process between the near normal appearing retina previously documented in young CEP290-LCA patients and the pigmentary retinopathy observed along the same region in older individuals. CONCLUSIONS: We speculate that fleck-like lesions in CEP290-LCA correspond to malformed, rudimentary or degenerated, including shed, photoreceptor outer segments. The topography and possible origin of the abnormalities may inform the planning of evolving genetic therapies for this disease.

High molecular diversity of full-length genome sequences of zucchini yellow fleck virus from Europe.

Zucchini yellow fleck virus (ZYFV), genus Potyvirus, is the causal agent of a disease of cucurbits. The genome sequences of seven ZYFV isolates of different origin were determined, two of which were reconstructed from a squash (Cucurbita sp.) collected in 2017 in Greece, while the others, accessions from the DSMZ Plant Virus Collection, were from samples collected in Italy, Greece, and France in the 1980s and 1990s. A high level of molecular diversity, well dispersed along the genome, was observed, but this was within the limits for assignment of the virus isolates to the same species. P1 was the most diverse gene, and isolates from squash contained an insertion in this gene.

A novel nepovirus causing a chlorotic fleck disease on common bean (Phaseolus vulgaris L.).

Two common bean leaf samples from Ethiopia that had shown chlorotic fleck and veinal mosaic symptoms but tested ELISA-negative for known viruses were mechanically transmitted to herbaceous hosts to obtain virus isolates ET-773/4 and ET-779. Virus purification from Chenopodium quinoa systemically infected with ET-773/4 yielded icosahedral particles measuring ~ 30 nm in diameter and containing a single capsid protein of ~ 58 kDa, suggesting a nepovirus infection. Analysis of nucleotide sequences generated from RNA1 and RNA2 of the isolates indicated that they represent a distinct virus species in the genus Nepovirus. Surprisingly, the most closely related sequence in the GenBank database was that of Hobart nepovirus 3, an incompletely described metagenomic sequence obtained from honey bees in Tasmania. This new nepovirus from Ethiopia is provisionally named "bean chlorotic fleck virus".

Investigating the mechanophysical and biological characteristics of therapeutic dental cement incorporating copper doped bioglass nanoparticles.

OBJECTIVE: This study was investigated the mechanophysical properties of zinc phosphate cement (ZPC) with or without the copper doped bioglass nanoparticles (Cu-BGn) and their biological effect on dental pulp human cells and bacteria. MATERIALS AND METHODS: Cu-BGn were synthesized and characterized firstly and then, the experimental (Cu-ZPC) and control (ZPC) samples were fabricated with similar sizes and/or dimensions (diameter: 4 mm and height: 6 mm) based on the International Organization of Standards (ISO). Specifically, various concentrations of Cu-BGn were tested, and Cu-BGn concentration was optimized at 2.5 wt% based on the film thickness and overall setting time. Next, we evaluated the mechanophysical properties such as compressive strength, elastic modulus, hardness, and surface roughness. Furthermore, the biological behaviors including cell viability and odontoblastic differentiation by using dental pulp human cells as well as antibacterial properties were investigated on the Cu-ZPC. All data were analyzed statistically using SPSS® Statistics 20 (IBM®, USA). p < 0.05 (*) was considered significant, and 'NS' represents nonsignificant. RESULTS: Cu-BGn was obtained via a sol-gel method and added onto the ZPC for fabricating a Cu-ZPC composite and for comparison, the Cu-free-ZPC was used as a control. The film thickness (≤ 25 µm) and overall setting time (2.5-8 min) were investigated and the mechanophysical properties showed no significance ('NS') between Cu-ZPC and bare ZPC. However, cell viability and odontoblastic differentiation, alkaline phosphate (ALP) activity and alizarin red S (ARS) staining were highly stimulated in the extracts from the Cu-ZPC group compared to the ZPC group. Additionally, the antibacterial test showed that the Cu-ZPC extracts were more effective than the ZPC extracts (p < 0.05). SIGNIFICANCE: Cu-ZPC showed adequate mechanophysical properties (compressive strength, hardness, and surface roughness) and enhanced odontoblastic differentiation as well as antibacterial properties compared to the ZPC-only group. Based on the findings, the fabricated Cu-ZPC might have the potential for use in the field of dental medicine and clinical applications.

In Vitro Analysis of Microbiologic Sealing of Two Different Fixed Implant-Supported Prosthesis Designs Cemented By Four Different Dental Cements.

PURPOSE: Despite the high success rate of implant-supported fixed restorations in dentistry, there is a lack of evidence on the marginal seal for dental cement. Thus, this study aimed to evaluate the marginal seal of implant-supported crowns and partial dentures cemented using four different dental cements. MATERIALS AND METHODS: The study evaluated the marginal seal of implant-supported crowns and partial dentures cemented using zinc phosphate, resin-modified glass-ionomer, self-adhesive resin, and noneugenol, acrylic-urethane polymer-based temporary dental cements. After cementation and thermal cycling procedures, the samples were incubated in Escherichia coli suspension for 5 days at 37°C under an aerobic environment. After debonding the restorations under sterile conditions, sterile cotton swabs were used to obtain microbial samples from the inner surface of each restoration and abutment surface. To analyze the contamination, each sample was immersed in a brain-heart infusion culture medium and incubated at 37°C for 24 hours, and then, the colony-forming units were counted and recorded. RESULTS: Regarding the number of colonies for Escherichia coli, the results revealed no substantial difference between the crowns and the fixed partial restorations (P = .25). However, the differences in the level of contamination between the cement groups were significant (P ≤ .001). The self-adhesive resin cement samples showed the lowest level of contamination, followed by the zinc phosphate and resin-modified glass-ionomer cements. The difference in the level of contamination between these groups was not significant. The temporary cement group exhibited significantly higher numbers of bacterial colonies in comparison to the other cement groups. CONCLUSION: Self-adhesive resin cement has better biologic properties for retaining implant-supported restorations than other types of dental cement.

The emergence of objectivity: Fleck, Foucault, Kuhn and Hacking.

The analytical notions of 'thought style', 'paradigm', 'episteme' and 'style of reasoning' are some of the most popular frameworks in the history and philosophy of science. Although their proponents, Ludwik Fleck, Thomas Kuhn, Michel Foucault, and Ian Hacking, are all part of the same philosophical tradition that closely connects history and philosophy, the extent to which they share similar assumptions and objectives is still under debate. In the first part of the paper, I shall argue that, despite the fact that these four thinkers disagree on certain assumptions, their frameworks have the same explanatory goal - to understand how objectivity is possible. I shall present this goal as a necessary element of a common project -- that of historicising Kant's a priori. In the second part of the paper, I shall make an instrumental use of the insights of these four thinkers to form a new model for studying objectivity. I shall also propose a layered diagram that allows the differences between the frameworks to be mapped, while acknowledging their similarities. This diagram will show that the frameworks of style of reasoning and episteme illuminate conditions of possibility that lie at a deeper level than those considered by thought styles and paradigms.

Correlation of Morphology and Function of Flecks Using Short-Wave Fundus Autofluorescence and Microperimetry in Patients With Stargardt Disease.

Purpose: The purpose of this study was to evaluate the functional relevance of longitudinal changes in hyperautofluorescent areas and flecks in Stargardt disease (STGD1) using short-wavelength autofluorescence (SW-AF) imaging. Methods: In this prospective, longitudinal study, 31 patients with STGD1 (56 eyes) underwent microperimetry (MP) and SW-AF imaging twice in 3 to 5 years. A total of 760 MP test points were included in the statistical analysis based on stable fixation and accurate alignment of SW-AF and MP. Autofluorescence intensity was qualitatively assessed in all MP test points. Small circumscriptive hyperautofluorescent lesions were defined as flecks. Longitudinal imaging characteristics observed on SW-AF were classified into the following categories: appearing, disappearing, and stable flecks, stable hyperautofluorescent, and stable background autofluorescence. The relationship between SW-AF intensity changes and MP changes was analyzed using a linear mixed model corrected for baseline sensitivity. Results: Retinal sensitivity declined most in locations without change in SW-AF intensity. Functional decline per year was significantly larger in flecks that disappeared (-0.72 ± 1.30 dB) compared to flecks that appeared (-0.34 ± 0.65 dB), if baseline sensitivity was high (≥10 dB; P < 0.01). The correlation between the change observed on SW-AF and the sensitivity change significantly depended on the sensitivity at baseline (P = 0.000). Conclusions: Qualitative longitudinal assessment of SW-AF poorly reflected the retinal sensitivity loss observed over the course of 3 to 5 years. Translational Relevance: When aiming to assess treatment effect on lesion level, a multimodal end point including MP focused on hyperautofluorescent lesions appears essential but needs further studies on optimizing MP grids, eye-tracking systems, and alignment software.

Comparative evaluation of microleakage of metallic copings luted with three different commercially available luting cements: An in vitro study.

Aim: To evaluate the microleakage of metallic copings luted with three different commercially available luting cements. Setting and Design: Comparative evaluation in vitro study. Materials and Methods: Thirty replicas of abutment analog were milled and divided into 3 groups. Nickel chromium copings were fabricated; marginal gap was evaluated with optical microscope and luted with Zinc Oxide Non Eugenol cement, Zinc Polycarboxylate cement and Zinc Phosphate cement. After Thermocycling, cemented specimens were placed into 0.5% aqueous solution of basic fuchsin solution for 24 hours for dye penetration. Copings were longitudinally sectioned and microleakage scores were evaluated. Statistical Analysis Used: Kruskal-Wallis analysis of variance (ANOVA) followed by Chi-Square test. Pairwise comparison of groups with Mann Whitney U test. Result: Mean microleakage score was least for Zinc Phosphate cement (1.075 ± 0.85) followed by Zinc Polycarboxylate cement (1.80± 0.23) and most for Zinc Oxide Non Eugenol (2.1± 0.37). The results of the study were statistically significant, P < 0.05. Conclusions: Within the limitations of the study, it was found that all cements exhibited certain amount of microleakage. Zinc Phosphate cement exhibited a mean microleakage score that was significantly lower than Zinc Oxide Non Eugenol cement and Zinc Polycarboxylate cement. When microleakage scores of Zinc Oxide Non Eugenol cement and Zinc Polycarboxylate cement were compared, the difference was found to be insignificant indicating that microleakage in these cements is similar.

In vitro cytotoxicity of different dental resin-cements on human cell lines.

Adhesive resin-cements are increasingly used in modern dentistry. Nevertheless, released substances from resin materials have been shown to cause cellular toxic effects. Disc-shaped specimens from 12 different resin cements and one conventional zinc phosphate cement were prepared and used for direct stimulation of five different human cell lines via transwell cell culture system or in an indirect way using conditioned cell culture media. Cytotoxicity was determined using LDH and BCA assays. All tested cements led to a decrease of cell viability but to a distinct extent depending on cell type, luting material, and cytotoxicity assay. In general, cements exhibited a more pronounced cytotoxicity in direct stimulation experiments compared to stimulations using conditioned media. Interestingly, the conventional zinc phosphate cement showed the lowest impact on cell viability. On cellular level, highest cytotoxic effects were detected in osteoblastic cell lines. All resin cements reduced cell viability of human cells with significant differences depending on cell type and cement material. Especially, osteoblastic cells demonstrated a tremendous increase of cytotoxicity after cement exposure. Although the results of this in vitro study cannot be transferred directly to a clinical setting, it shows that eluted substances from resin cements may disturb osteoblastic homeostasis that in turn could lead to conditions favoring peri-implant bone destruction. Thus, the wide use of resin cements in every clinical situation should be scrutinized. A correct use with complete removal of all cement residues and a sufficient polymerization should be given the utmost attention in clinical usage.

Electrophysiological Evaluation of Fleck Retina and Temporal Macular Thinning in X-Linked Alport's Syndrome.

We report a 39-year-old with Alport's syndrome. The patient presented with anterior lenticonus, cataract, and a corrected distance visual acuity of 20/25 and 20/60 in the right and left eyes, respectively. Fundus examination revealed generalized retinal flecks sparing the fovea in both eyes. Optical coherence topography showed temporal macular thinning. Normal fundus autofluorescence was observed in both eyes. Full-field electroretinography (ERG) demonstrated normal photopic and scotopic responses, while multifocal ERG showed no reduction of amplitudes generated from the temporal thinned macula, compared to the nasal macula, indicating preserved functional integrity of the retina.

Deep learning segmentation of hyperautofluorescent fleck lesions in Stargardt disease.

Stargardt disease is one of the most common forms of inherited retinal disease and leads to permanent vision loss. A diagnostic feature of the disease is retinal flecks, which appear hyperautofluorescent in fundus autofluorescence (FAF) imaging. The size and number of these flecks increase with disease progression. Manual segmentation of flecks allows monitoring of disease, but is time-consuming. Herein, we have developed and validated a deep learning approach for segmenting these Stargardt flecks (1750 training and 100 validation FAF patches from 37 eyes with Stargardt disease). Testing was done in 10 separate Stargardt FAF images and we observed a good overall agreement between manual and deep learning in both fleck count and fleck area. Longitudinal data were available in both eyes from 6 patients (average total follow-up time 4.2 years), with both manual and deep learning segmentation performed on all (n = 82) images. Both methods detected a similar upward trend in fleck number and area over time. In conclusion, we demonstrated the feasibility of utilizing deep learning to segment and quantify FAF lesions, laying the foundation for future studies using fleck parameters as a trial endpoint.

Retention of luting agents used for implant-supported restorations: A comparative In-Vitro study.

AIMS: The aim of this study was to compare the retention of different luting agents used with implant-supported restorations. MATERIALS AND METHODS: A total of 90 custom metal frameworks and copings were prepared and divided into six different luting agent groups (n = 15/group): polycarboxylate cement (PC), resin-modified glass-ionomer cement (RMGIC), two self-adhesive resin cements (SARC), copper-ion zinc-phosphate cement (CZPC), and non-eugenol temporary resin cement (TRC). After sandblasting with 50 µm Al2O3, the copings were cemented on frameworks and stored in artificial saliva for 48 h at 37°C and thermocycled between 5-55°C for 37,500 cycles. Samples were subjected to tensile testing by a universal testing machine, and data were statistically analyzed. RESULTS: The differences between the retention values of types of cement were significant (P < 0.05). The maximum retention value was calculated for CZPC (755,12 ± 55 MPa) while the lowest value was for TRC (311,7 ± 61 Mpa). CONCLUSION: Neither of the tested cement had superiority over another to ensuring retention. The types of cement presented were meant to be a discretionary guide for the clinician in deciding the amount of the desired retention between castings and abutments.

Peroneal tendon dislocation in talus fracture and diagnostic value of fleck sign.

INTRODUCTION: Talus fractures are not uncommon and one of the serious fractures in the foot and ankle. Peroneal tendon dislocation is one of the commonly missed soft tissue injuries which may have significant impact on the outcomes including persistent pain and swelling. They have been reported to be associated with calcaneum as well as talus fractures. AIM: To report the incidence of peroneal tendon dislocation in talus fracture and the significance of fleck sign in the diagnosis of peroneal tendon dislocation. METHODS: We retrospectively reviewed 93 consecutive talus fractures in the period between 1/1/2011 to 1/11/2018. Inclusion criteria were: The patient underwent open reduction and internal fixation, had pre-operative CT scan that is available for review and three view ankle plain radiographs. Two independent authors review the radiographs for peroneal tendon dislocation, fleck sign and fracture classification, if any. Any dispute was resolved by the senior author.Patient records were reviewed for laterality, age, sex,mode of injury, associated injuries and operative interventions. 50 ankles met the inclusion criteria. 49 were males, mean age was 32.5 year and the predominant mode of injury was a fall from height. RESULTS: Peroneal tendon dislocation was found in ten patients out of 50 (20%). Risk of dislocation increased with severity of the fracture and neck fractures. Most of the dislocations were missed by surgeons and radiologist, and no additional procedures were done to address such an injury. The Fleck sign had a statistically significant correlation with peroneal tendons dislocations (p=.005) CONCLUSION: Peroneal tendons dislocation is associated with as high as 20% of talus fractures. The authors recommend carefully reviewing CT scans by surgeons and radiologists alike to avoid missing such injury and allow for appropriate surgical approach utilization. The Fleck sign is a highly specific radiographic sign that has a statistically significant correlation with PT dislocation and hence we recommend intra-operative assessment of peroneal tendons in patients with the fleck sign.

The antimicrobial and cytotoxic effects of a copper-loaded zinc oxide phosphate cement.

OBJECTIVES: Evidence about modifications of dental luting materials to minimize biological failure at the "marginal gap" between teeth and fixed prosthodontics is scarce. We compared a copper-modified (Co-ZOP) and a conventional zinc oxide phosphate cement (ZOP) in terms of antimicrobial and cytotoxic potentials in vitro and in vivo. MATERIALS AND METHODS: Specimens of ZOP and Co-ZOP were characterized by the mean arithmetic roughness (Ra) and surface free energy (SFE). Powder components were examined using scanning electron microscopy (SEM). Energy-dispersive X-ray spectroscopy (EDX) showed elemental material compositions. In vitro microbial adhesion was shown using SEM, luminescence, and fluorescence assays. CCK-8 assays of mouse fibroblasts (L929) and human gingival fibroblasts (GF-1) were performed after 6, 24, and 48 h of specimen incubation. In vivo, ZOP and Co-ZOP specimens were applied intraorally for 12 h; biofilm accumulation was shown using SEM. RESULTS: Ra of ZOP and Co-ZOP showed no significant differences; SFE was significantly higher for Co-ZOP. EDX exhibited minor copper radiation for Co-ZOP, none for ZOP. In vitro fungal adhesion to Co-ZOP was significantly higher than to ZOP; in vitro streptococcal adhesion, cytotoxicity, and in vivo biofilm formation were not significantly different. CONCLUSIONS: Co-ZOP showed low surface allocations of copper with no improved antimicrobial properties compared with conventional ZOP in vitro or in vivo. CLINICAL RELEVANCE: Antimicrobial effects and low cytotoxicity of biomaterials are important for the clinical outcome. Based on our in vitro and in vivo results, no clinical recommendation can be given for the tested Co-ZOP.